Choose the divider according to the drawer layout
The most useful starting point is the direction in which you want to divide the drawer. Select the A4 lengthwise format when the storage plan is based on lengthwise A4 documents or when you need a steel component that can work with a transverse separator. Choose the basic crosswise part when the aim is to divide a 432 mm-wide SQart drawer in depth.
These are not interchangeable descriptions of the same part. They represent two different approaches to organising the drawer, so check the intended direction and internal dimensions before adding a component to a workplace specification.
When the A4 lengthwise divider makes sense
The A4 lengthwise divider is a practical choice for document-focused storage. Its powder-coated steel construction is suited to a structured filing layout, while compatibility with a transverse separator can help create additional sections within the drawer. It is worth considering for workstations where files need to be kept in a consistent orientation.
When to choose the basic crosswise part
The basic crosswise part is intended for a simpler depth division. Its black plastic construction provides a lightweight component for separating the interior of a 432 mm-wide drawer. This can be appropriate when the storage requirement is general organisation rather than a dedicated A4 filing arrangement.
Materials, colours and specification checks
The collection includes black and grey as listed colour options, while the individual components use different materials: powder-coated steel for the A4 lengthwise divider and black plastic for the basic crosswise part. Review the available colours and material information when matching dividers with an existing SQart setup.
Origin is available on request, and the collection is marked as circular in the supplied product information. For a project specification, confirm the exact component, colour and compatibility requirements before ordering. The available colours and materials document can also help with internal selection and finish coordination.
Plan the next step
First identify the SQart drawer width, the direction of separation and whether the layout is based on A4 documents. Then compare the two component types and select only the divider format that matches the intended arrangement. If the drawer needs both lengthwise and transverse organisation, verify that the chosen A4 divider and transverse separator are compatible.
Myntwork offers these Nowy Styl SQart drawer organisation products on a monthly lease, allowing workplace planners to consider them as part of a broader furniture and storage setup. Before finalising a selection, check the product name, format, material, colour and any project-specific availability requirements.
Frequently asked questions about Nowy Styl Pedestal Drawer Divider SQart
What is the difference between the two SQart pedestal drawer dividers?
The A4 lengthwise divider is a powder-coated steel component for lengthwise A4 filing and is compatible with a transverse separator. The basic crosswise part is a black plastic divider that divides a 432 mm-wide SQart drawer in depth.
Which divider should I choose for A4 documents?
Choose the A4 lengthwise format when your storage layout is based on lengthwise A4 documents. Check whether you also need a compatible transverse separator for additional internal sections.
Which divider is intended for a 432 mm-wide drawer?
The basic crosswise part is specified for SQart drawers that are 432 mm wide. It divides the drawer in depth, so confirm the drawer measurement before selecting it.
Are the SQart dividers made from the same material?
No. The A4 lengthwise divider is made from powder-coated steel, while the basic crosswise part is made from black plastic.
What should I check before specifying a divider?
Check the drawer width, the direction of the required division, the intended A4 filing layout, the component material and the selected colour. Also verify compatibility where a transverse separator is required.
